.7 Cu Ft Gravity Convection Lab Oven 10GC by Quincy Lab
These gravity convection ovens are designed to meet the laboratory needs of industry, research organizations and schools. Well-crafted and versatile, they are used for drying, baking, sterilizing. evaporating, heat treating, annealing and testing. The GC series ovens are competitively priced and offer exceptional value and reliability.
5.22 Amp/ 600 Watt/ Bi-metal thermostat/ Model 10GC
Advanced Design
Cabinets are as attractive as they are durable. Exteriors are painted light gray and have a hard, scratch-resistant hammer finish. Doors open with high impact thermoplastic handles. Cabinets have heavy steel double-wall construction. Work space is insulated from the outer cabinet with one inch of high density mineral wool, and interiors are made of corrosive-resistant aluminized steel.
Controls
Quincy Lab uses quality UL and CSA recognized components in all ovens. The control panel is equipped with an illuminated ON-OFF rocker switch and a heat/cycle pilot light. Temperature is controlled by an automatic Hydraulic or a bi-metal thermostat.
Heating Elements
Energy efficient, low-watt density incoloy sheathed elements are engineered into a compact design for quick run-up and recovery times. Temperature uniformity is greatly improved by a perforated heat shield which absorbs radiant heat and distributes it more evenly. Models have temperature range to 220ºC (428ºF).
-
Each oven is tested and approved before shipment. ready-to-use. No assembly is required.
-
Quincy Lab, Inc. has been a mainline manufacturer of laboratory ovens and incubators for more than 25 years–dedicated to product value, customer satisfaction and ongoing product support.
This item will be built upon your order and drop shipped from the manufacturer. Before it is shipped each lab oven is completely assembled, tested and approved. When you receive your lab oven it is ready to plug in and go.
Please allow 3-6 weeks for delivery.
PLEASE NOTE: Average turn-around time is 3 weeks or less but it can be longer. If you have not received your delivery in three weeks, please call 1-205-853-2711 for status. Because these are made to order, a 20% cancellation fee will be applied to any orders canceled during the delivery window of 1 to 6 weeks. As always, we stand 100% behind the quality of the product.
| Model No. |
Model Type |
Inside Dimensions WxHxD |
Cubic Ft. Capacity |
Outside Dimensions WxHxD |
Type of Thermostat |
Wattage |
Amps |
Shipping Weight |
Max. Temperature |
| 10GC |
Gravity Convection | 12x10x10
0.7 |
14x17x12 |
Bi-Metal |
600 |
5.22 |
44 LBS |
225°C/437°F |
| 10AF |
Air Forced |
12x8.62x10 |
0.6 |
14x20.5x12 |
Bi-Metal |
800 |
6.95 |
50 LBS |
225°C/437°F |
| 20GC |
Gravity Convection |
13x13x13 |
1.27 |
15x21x15 |
Hydraulic |
800 |
6.05 |
61 LBS |
225°C/437°F |
| 20AF |
Air Forced |
13x11.625x13 |
1.14 |
15x24.5x15 |
Hydraulix |
1000 |
8.69 |
66 LBS |
225°C/437°F |
| 30GC |
Gravity Convection |
18x16x12 |
2.0 |
20x25x14 |
Hydraulic |
1200 |
10.43 |
78 LBS |
225°C/437°F |
| 30AF |
Air Forced |
18x14.625x12 |
1.83 |
20x28.5x14 |
Hydraulic |
1600 |
13.91 |
82 LBS |
225°C/437°F |
| 40GC |
Gravity Convection |
18x21x14 |
3.0 |
20x30x16 |
Hydraulic |
1600 |
13.91 |
94 LBS |
225°C/437°F |
| 40AF |
Air Forced |
18x19.625x14 |
2.86 |
20x33.5x16 |
Hydraulic |
1600 |
13.91 |
112 LBS |
225°C/437°F |
Comes standard in 110 volts, but available in 230 volts upon request at no extra charge. Please be sure to indicate in the comments section of your order, if you would like the 230 volt model.
