Two Stage: Produces 1-micron ultimate pressure
Rotary Sliding Vane: Provides 85 liter per minute (3cfm) capacity and operates quietly
Direct Drive: Reduces space needed
Gas Ballast: Helps purge moisture from vacuum system
Trap: Reduces risk of oil suck back into the system
- Free Air Displacement: 85 liters per minute (3 cubic Feet Per Minute)
- Ultimate Vacuum: 1-micron laboratory conditions/better than 25 microns field conditions
- Pump Speed: 1725 RPM
- Motor: 1/2 HP 220V, 60Hz
- Oil Capacity: 27oz. (785cc)
- Operating Temperature: 30 degrees Fahrenheit to 170 degrees Fahrenheit
- Intake Port: 3/8 OD for 3/8 ID Tubing
- Weight: 30 lbs.
- Dimensions: 11H x 14"L x 5.25"W (27.5cm x 35cm x 12.5cm)
NOTE: This product ships direct from the manufacturer and should arrive in 7-14 days after completion of your order. WARRANTY These vacuum pumps are warranted to be free from defects in workmanship and materials for a period of one year. Our liability is limited to repair or replacement of these products if these products are found to be defective by us. "40995Apparatus & EquipmentVacuumAPP110"Vacuum Hand Operated Pump w/ Pressure Gauge"-47Y-INFAAN31.9526.95"This is a new hand vacuum pump made of a durable polychloroethylene plastic with a gauge to measure vacuum in mm of mercury or pascals. a pump with a gauge that is better for automotive and physical science use where calibrated vacuum is required. This plastic pump can easily provide a vacuum of 25-27in/Hg by pumping its handle. This unit is capable of generating a vacuum of 50 mm Hg. The pumping rate is about 15ml per stroke. By changing its working mode, the pump can be used to establish air pressure as high as approximately 2 atm. The pump itself is sealed and self lubricated. It is often used in conjunction with buchner funnels. This pump is used to create a vacuum, not to hold a vacuum. It comes with approximately 2 feet of tubing. Uses of this product are for middle school physical science experiments, vacuum filtering, siphoning, leakage checking, and pumping and indirect transporting of liquids. You could also use this for other applications such as automotive or light air-conditioning work. It is light weight, small volume, easy to carry, and easy to use. This pump is not intended for high vacuum applications. Comes with gauge."40995Apparatus & EquipmentVacuumAPP111"High Vacuum Pump-5CFM-110V"0Y-INFAAN599.99559.99"THESE DIRECT DRIVE PUMPS PROVIDE THE BEST PERFORMANCE/COST RATIO AVAILABLE TODAY. This laboratory High Vacuum Pump produces 1-micron laboratory conditions/better than 25 microns field conditions. Provides 141 liter per minute (5 cfm) capacity and operates quietly. It pumps at 1725 RPM. The motor is 1/2 HP 110V, 60HZ. The intake port is 3/8" OD for 3/8" ID tubing. The dimensions: 11" H x 14" L x 5 1/4" W. Comes with an initial supply of high vacuum pump oil.
NOTE: This product ships direct from the manufacturer and should arrive in 7-14 days after completion of your order. WARRANTY These vacuum pumps are warranted to be free from defects in workmanship and materials for a period of one year. Our liability is limited to repair or replacement of these products if these products are found to be defective by us. " " "
|Country of Origin||No|
|Available for Gift Wrap||No|