Automatic Combined pH/TDS/NaCl/Temp Meter

$389.95

Be the first to review this product

Overview:

Automatic Combined pH/TDS/NaCl/Temp Meter

Availability: In Stock

Details

Mi306 is a waterproof portable logging microprocessor-based Conductivity/TDS/NaCl/temperature meter.
 
The autoranging feature of the EC and TDS ranges automatically sets the meter to the scale with the highest possible resolution.
 
The Auto Endpoint (HOLD) feature automatically freezes the display when a stable reading is reached. The measurements are automatically (ATC) or manually (MTC compensated for temperature.
 
The temperature coefficient value is user selectable. It is possible to disable the temperature compensation and measure the actual conducivity (NoTC).
 
The Battery Error Preventing System (BEPS) switches the meter off when the batteries are too weak to support proper function. The meter can store measurements in memory by logging function for retrieval at a later time upon user request.
 
Mi306 also allows data transfer to computer through the RS232 port. Double LCD displays, for simultaneous readings of the specific conductivity and temperature.
 
Range:
(Autorange) EC:0.00-29.99 microS/cm; 30.0 to 299.9 microS/cm; 300-2999 micro S/cm
(Autorange)TDS:0.00-14.99 mg/L; 15.0-149.9 mg/L; 1.50 to 14.99 mg/L; 15.0-100.0 g/L; up to 400.0 g/L
NaCl: 0.0-400.0%
Temp: 0.0-60.0C
Resolution:
EC: 0.01 microS/cm(0.00-29.99); 0.1 microS/cm(30.0-299.9); 1 microS/cm(300-2999); 0.01 mS/cm(3.00-29.99 mS/cm); 0.1 mS/cm(over 30.0)
TDS: 0.01 mg/L(0.00-14.99); 0.1 mg/L(15.0-149.9); 1 mg/L (150-1499); 0.01 g/L(1.50-14.99); 0.1g/L(over 15.0 g/L)
NaCl: 0.1%
Temp: 0.1C
Accuracy:
EC: +/- 1%(+/- 0.05 microS/cm or 1 digit whichever greater)
TDS: +/- 1%(+/-0.053 ppm or   ""      ""    ""      )
NaCl: +/- 1%
Temp: +/- 0.4%
Typical EMC Deviation:
EC/TDS/NaCl: +/- 1% of reading
Temp: +/- 0.1%
Logging: up to 250 records, LOG on demand or auto
Communication: w/ PC thru RS232 port
EC Calibration: 1 pt w/ 7 memorized buffers: 84, 1413, 5k, 80k, 111800 microS/cm
NaCl Calibration: 1 pt w/ MA9066 buffer
Temp Compensation: auto or manual from 0-60C
Temp Coefficient: 0.00-6.00%/C(for EC/TDS only) Default: 1.90%/C
TDS Factor: 0.40 - 0.80 (default: 0.50) ref. temp: 20 or 25C
Probe: MA814D/1 EC probe with built-in sensor & 1m cable
Auto-off: after 5 minutes non-use
Battery Type/Life: 1x9V battery/approx 100 hours of use
Casing: IP 67
Environment: 0-50C/32-122F; max RH 100%
Dimensions: 200 x 85 x 50mm
Weight: 280g
 
 

Additional Information

SKU MILMI306
Lead Time N/A
Product Warnings Caution - To be used under Adult Supervision. Proper Laboratory Safety Procedures Should Always be Followed!, Caution - Product contains glass and may break if handled improperly. Handle with care.
Country of Origin No
Available for Gift Wrap No

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Warnings:
  • Caution - To be used under Adult Supervision. Proper Laboratory Safety Procedures Should Always be Followed!
  • Caution - Product contains glass and may break if handled improperly. Handle with care.